Elkomponenter för elbilskonvertering finns tex i EV West´s katalog
EV West har ett stort utbud av elektriska bildelar, elmotorer, controllers, elkonverteringskit och laddstationslösningar för ditt elfordon eller din elbilskonvertering. Från elmotorer och controllers till laddare, kablar och kompletta elkonverteringssatser till många bilmodeller. EV West har en lågprisgaranti och den tekniska personalen kan säkerställa rätt produkter för ditt elfordon eller ditt elbilsprojekt.
Elmotor NetGain HyPer 9 DHV AC System på 130hp DIN (Klicka på bilder)
| Motoreffekt | Nominell 88kW, max 95,5kW (130hp). |
| Vridmoment | 220Nm 0-3600 varv/min. |
| Max RPM | 8000 varv/min. |
| Max spänning | 80V. |
| Nominell spänning | 144V, max 180V. |
| Vikt | 54kg. |
This system has many unique features that set it apart from any other EV solution on the market.
- Industry Leading 3 Phase SRIPM Motor and Controller/Inverter
- DC supply voltage from 90V to 180V and current up to 500A Peak
- Brushless Motor
- Cageless Rotor - Higher efficiency, no heat from wasted energy
- Synchronous Fields - Full toque is harnessed without Rotor Slip
- Up to 95% Efficiency!
- Up to 50% higher torque than similar sized AC Induction motors running at the same power levels!
- Astounding performance in field weakening area with +50% power up to 5 times nominal speed
- Ultra compact controller
- Field Oriented Control (FOC) algorithm optimized specifically for Synchronous Reluctance Internal Permanent Magnet motors
- Fully customizable controller I/O
- Extensive program customization from PC with Smartview Software
- Robust and Reliable
The Drive End (DE) shaft is 1.125" in diamter with a 1/4" keyway.
Controller HyPer-Drive X144™
Equipped with the latest technology in power electronics, our HyPer-Drive X144™ Controller can drive SRIPM motors in a wide range of applications up to 85kw peak power. The X1 is the only controller capable of powering the SRIPM technology in our HyPer 9DHV ™ Motor. The X144 can also be configured to control most AC Induction and Permanent Magnet motors. This Compact unit serves two functions:
- Controller - We refer to the Low Voltage Logic Module as the Controller. The K1 Wire Harness receives and transmits data for Throttle, Brake, Direction, Power Limits, Rotor Position, etc. See the X144 Technical Manual for more capabilities and specifications. See the HyPer 9HV System User Manual for default wiring and programming.
- Inverter - We refer to the High Voltage Power Module as the Inverter. The DC Supply connects to B+ & B- terminals where it is inverted to 3 Phase AC for the U,V, & W Terminals to drive the HyPer Motor. This Inverter can also be programmed as a Slave to an external Control Unit, which takes responsibility from the Controller's Logic Module.
- DC supply voltage from 90V to 180V and current up to 500A Peak
- Up to 50% higher power density than direct competitors (Superior power in half the footprint)
- Field Oriented Control algorithm optimized specifically for Synchronous Reluctance Internal Permanent Magnet motors
- Fully customizable I/O
- IP65 protection - Robust and Reliable
- Extensive program customization from PC with Smartview Software
- Optional Liquid Cooling
NetGain HyPer 9 DHV AC System 156V Performance
Kontrollpanel SME Compact Display för HyPer-Drive X144
The SME Compact Display is an optional add-on component for any HyPer-Drive X144 ™ controller/Inverter. The immediate EV capabilities of this LCD Compact Display include:
- Diagnostic Mode to view System values such as - HyPer Motor RPM, Temperature, Torque, Current and more.
- Display vehicle speed in KM/H. This is a calculated value determined by tire diameter and up to two gear ratios.
- Display active fault code of highest priority.
- Indicate main battery pack state of charge.
- Indicate power de-rating due to Motor or Inverter over-temperature.
- Cycle between 3 operating profiles with push button (E/S/H) switch. (Must be assigned in Clone file)
Contactors™- För X144 Controller/Inverters
The HyPer 9HV Integrated System™ (IS) includes the Gigavac GV200PA-1 Main Contactor. It has a 12V Externally Economized Coil which is required by the HyPer-Drive X144™ Controller/Inverter.
We offer the GV200QA-1, GV200PA-1, and GV200MA-1 (12V Internally Economized Coil) as separate or replacement items as well.
- Up to 800 Volts DC
- 500+ Amps
Samsung INR Litium-batterier 20R
Thunderstruck EV 2500 Charger och progr. CAN Bus Laddkontroller
Vacuumpump till Girling 1 och 2-krets bromsservo
Gasreglage (Electronic Throttle Control)
Länk till:
EV West katalog
EV West på Facebook
Elmotor NetGain Hyper 9 HV AC och controller HyPer-Drive X144 manual
Larmpanel SME Compact Display för HyPer-Drive X144 manual
